Common Mistakes in Designing Kraft Boxes
2022-04-19
Kraft cardboard boxes are often mass-produced due to their low cost and ease of handling. There are various kraft boxes, but the most common is the 3 mm twin-wall version. You can easily use these cardboard boxes to pack items of different shapes and sizes. The total size of the front pack box can vary from a few inches to a few feet. Make sure you provide accurate estimates of product size when packing in cardboard containers. This will help to ensure that there is enough space for the product and that the container is not too crowded.
Mistakes made during the production of kraft boxes include:
1) Incorrect upload of articles to container:
Uploading articles to kraft boxes is an important step because the box will be closed during the process. If not packed properly, products may move during shipping and cause damage to other materials or even breakage of other contents.
2) Wrong labeling in kraft boxes:
The name and address of the address should be set in such a way that once the box is closed, it can be exited. It is best to place this label on the end of the corrugated board before producing each kraft box. This will stop the early leak of information about origin, content, and who the packaging is for. If you produce them in bulk, different labels should be attached to each box with the help of unlimited graphic design. The adhesive used for this should be well-tested and can stick to boxes even when exposed to adverse weather conditions.
3) Too many inks on kraft labels:
Kraft paper itself has a high degree of porosity on the surface, making it ideal for printing with ink that can provide clear and vivid images. However, if more than one color is used on the same label, the ink may work during shipment if the cardboard is wet. This is why each box should have both front and back sides printed on only one ink color. Also, be sure to use quality ink that is not easily contaminated when wet.
4) Error wrapping carton flaps:
Before sending boxes to print, you should check for any flaps in their flaps. Good printing starts with excellent quality boxes that can hold the ink without piercing or working, double or single wall boxes that are easy to fold and do not tear easily, etc. If these conditions are not satisfied, you will end up with a product that looks good.
5) Misuse of glue flap adhesive tape:
Adhesive tapes are made by bonding kraft paper or films with adhesive-based adhesive on one side of the tape. The gum side of the tape goes against the body of the box while using it during the cardboard binding process. You need to use adhesive tape to attach the flaps and seal the boxes. You need to do this carefully and carefully to make it look clean. If you use too much or too little, it will not look good.
6) Poorly printed logos:
Printing a logo is not an easy task for newcomers to the market. Therefore, you may hire packaging design company to design this print and need to pay attention to the smallest details such as the colors used, their shadows and durability, logo size and location, etc., during the process. Even a small mistake can ruin your cardboard box and give it a useless look.
Concluding Remarks:
Kraft boxes have a long shelf life, which is why they are needed in the market. They can be used in many ways depending on the situation and the needs of the customers. It’s always best to invest some time, plan things carefully and use high quality materials while producing business card boxes to maintain your product image.
